Accessories

Both kids and parents will love Topeak's BabySeat II. It's suspended to provide little ones with an extra-plush ride and it boasts important safety features, such as adjustable foot rests and safety straps, a quick-release padded safety bar, a 4-way safety harness, and dual safety latches that lock the seat to the included disc brake-compatible rear rack.

The Tern Clubhouse turns your GSD into a modular minivan. Configure it with the included seatpad and backrest to carry two kids. Swap out the seatpad for a 600 mm x 400 Eurocrate and haul a week’s worth of groceries, or bring a (very) little one along in a Thule Yepp Maxi seat. With specialized tubing that protects small hands, and a compact profile for vertical storage, the Clubhouse lets the whole team ride together. - Designed to fit two kids, from 5 – 10 years old* - Converts in seconds to a heavy-duty grocery-hauler, built for 600 × 400 mm Eurocrate compatibility - Includes four bottle-mounts for water bottles, coffee mugs and locks - Designed with extended side rails for added hand protection - Includes bartape for added rail-padding - Includes seat-cushion and kid-designed reclining backrest *Recommended height between 110-140 cm; also requires Sidekick Lower Decks and Cargo Hold Panniers to be fitted

The Cargo Lid Lock is an extra-long vinyl-coated cable with a combination lock. It's designed for use with the Cargo Lid that comes with the Storm Box. The Cargo Lid Lock makes the Storm Box with Cargo Lid less attractive to petty thieves, so you can make a quick stop somewhere without worrying so much about your stuff. - Secures the Cargo Lid to the Storm Box using a combination lock - Helps deter crimes of opportunity-makes the Storm Box with Cargo Lid less attractive to petty thieves - Provides extra peace of mind when briefly leaving cargo unattended - Lightweight, compact, and easy to carry - Vinyl coating for scratch prevention

The Storm Shield is a weather-resistant canopy that keeps the elements out, the good vibes in, and kids' complaints at bay. Combine with the Clubhouse+ or Clubhouse to protect passengers from rain, snow, and wind. It gives little ones a cozy place to sit (or sleep) when bad weather hits, and can also be used for sun protection on high UV days. - Protects young passengers from the elements-makes every day a great day to ride - Carry up to two kids, in or out of child seats - Fits kids up to 140cm tall (plus room for helmets) - Waterproof nylon material keeps kids dry, while ventilation panel keeps them comfy - Roll up the side panels on warm, sunny days - Designed for wind resistance - Reflective accents for safer riding - Add the Storm Box (not included) for even more weather protection - Requires the Clubhouse+ on the GSD Gen 2 - Requires the Clubhouse on the GSD Gen 1

Transform your GSD into a minivan with the Clubhouse+. Use it with the included seatpad and backrest to create a comfy and protected space for two kids. Swap out the seatpad for a 600 mm x 400 Eurocrate and it becomes a heavy-duty grocery hauler. The Child Seat Expansion Bar supports up to two child seats for younger kids, allowing you to mix and match seating configurations as your kids grow from toddlers to 10-year-olds. It's more fun than a car seat any day. The Clubhouse+ is part of the Passenger System. Other accessories may be used with the Clubhouse+ to safely carry passengers. - Designed to fit two big kids from 5 – 10 years old*; may fit younger kids when used with compatible child seats - Modular design includes Child Seat Expansion Bar to support one compatible child seat in the rear position**, or two ** Thule Yepp Maxi seats (sold separately) - Converts in seconds to a heavy-duty grocery-hauler, built for 600 x 400mm Eurocrate compatibility (sold separately) - Includes four bottle mounts for water bottles, coffee mugs, and locks - Designed with extended side rails for added hand protection - Includes bartape for added rail-padding - Includes kid-designed seat-cushion and reclining backrest - Supports vertical parking when Flat Bar is used*** * Recommended height between 110-14cm. Smaller children will require child seats. ** When using the Child Seat Expansion Bar, the rear position must be occupied by a child seat. *** Child Seat Expansion Bar will interfere with vertical parking.

The Cargo Hold 52 Panniers are like an extra-roomy trunk for the GSD. With a volume of more than 100 liters per pair, they're spacious enough for weekly shopping runs, camping adventures, or hauling all your kids' bags, instruments, and sporting equipment (while your kids are on board, of course). Use in Roll-Top Mode for weather protection, or quickly switch to Bucket Mode for stashing oversized cargo. Two Fidlock buckles make opening and closing a snap. - Holds up to 104L per pair (52L per pannier) for hauling heaps of whatever - Two Fidlock buckles for hassle-free access to your stuff - Weather-resistant roll-top design packs flat for a neat and tidy look, even when loaded - Easily converts to Bucket Mode for carrying oversized cargo-stiff design preserves the basket/bucket shape - Compatible with (up to 2) child seats* - Made with tough, durable, Bluesign nylon fabric - Reflective decals for extra visibility at night * Must be used in Bucket Mode when used with a child seat, and may require a Pannier Adapter. For two child seats, Bucket Mode and two Pannier Adapters are required (Sold separately. The GSD supports two Thule Yepp Maxi child seats).

The Expert XC Mountain Bike shoes take the spirit of high performance found in the S-Works iteration and puts it in a value-loaded package. Along these lines, you'll find that it has everything you need to get your feet wet in cross country racing and riding, like a light overall construction, a sophisticated carbon outsole, a single lightweight snap-replaceable IP1 Boa closure, and a durable SlipNot rubber tread. So go ahead, push it a little harder—these shoes are here to take you to the next level. - Body Geometry sole and footbed construction is ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon outsole is designed to flex in the toe for more comfortable walking, while it's directionally stiff in order to increase power transfer. - Boa IP1 Snap dial closure for on-the-fly micro-adjustment, backed by the Boa lifetime guarantee. - Light, supple thermo-bonded upper for a superior fit. - SlipNot rubber outsole is optimized for grip & durability in all conditions. - Removable toe lugs for added traction and run-ups. - Standard Fit for on-bike support and all-day comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 350g (1/2 pair, size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

Whether you're hunting for Strava PRs or looking to ride big elevation, the all-new Torch 3.0 is the perfect companion. Combining classic aesthetics, premium construction, and elevated comfort, the all-new Torch 3.0 is a not-so-distant relative to its S-Works counterpart. Sharing key features like a unidirectional carbon plate, dual-zone Boa closure, and a seamless upper, the Torch 3.0 is an efficient, comfortable, and dependable performance shoe. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Unidirectional Carbon sole engineered to be stiff, yet light with a large rubber heel and toe for off-the-bike traction. - Dual BOA Li2 dials for dual direction micro-adjustments and pop release - Seamless upper constructed from mesh, TPU, and with zonal reinforcement to maximize lockdown and comfort - Internal heel counter provides a supportive and secure heel fit - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 288g (1/2 pair, Size 42)

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest-efficiency, smoothest-running SuperPista to date. Efficient, accurate, durable are the trademarks of the SuperPista floor pump. - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm, and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with a secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with a magnetic dock - Rated to 220psi

A tough, insulated, waterproof, and comfortable shoe built for riders without an off-season. - Waterproof GORE-TEX Insulated Comfort liner for maximum protection and warmth - Integrated lace shield design with high cuff cover construction - A fleece-lined insole for added insulation and heat retention. - 360-degree reflectivity for high visibility - MICHELIN high-performance, dual-density rubber outsole offers superior traction with unmatched durability, stability, and slip resistance - Torsional midsole “TORBAL” allows natural rider “flow” motion during downhill descents

Tough enough to withstand even the wettest, coldest rides, the MW702 is engineered to keep you mountain biking comfortably through the winter months. Sporting a fleece insole liner, a waterproof and breathable GORE-TEX layer, and durable ULTREAD XC grip, this shoe is built for those that don't slow down when the temperature drops. Features: - Winter Mountain Bike Shoe: the MW702 is a versatile wet weather racing shoe - Waterproof Shoe: insulated GORE-TEX layer keeps the warmth in and the elements out - High Cut Design: tall cuff construction around the ankles gives added protection - ULTREAD XC Outsole: rugged rubber outsole offers supreme grip in slippery conditions off the bike - Adjustable Fit: L6 BOA® dial closure system cinches in seconds for a secure fit every ride EXCEPTIONAL TRACTION When the going gets tough, confidently keep your footing. ULTREAD sole technology, a new proprietary rubber compound and sole pattern, delivers enhanced durability and traction while walking or pushing your bike over slick terrain. PROTECTION AGAINST THE ELEMENTS The MW702's waterproof GORE-TEX® comfort liner insulates against the cold and wet, with an insole fleece liner for extra heat retention. A wraparound lace shield design provides additional weather-proofing, with a tall ankle cuff to keep moisture and cold breezes out.

- Carries 2 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-ubcg hitches out of the box. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 15 pounds. - Made in Madison, WI.

If you’re looking for a car rack that will haul your favorite 2-wheeled possessions with swagger and security, the Bones Hitch 3-bike has you covered. With arching lines and robust, American-made materials this hitch rack can be summarized in two words: beautiful simplicity. Weighing in at only 16 pounds, this 3-bike hitch rack is a full 25% lighter than similar racks—et just as strong. With integrated anti-sways and hold downs, the Bones Hitch is a fully functional piece of art. - Carries 3 bikes (35 pounds/bike). - Preassembled. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 16 pounds. - Made in Madison, WI.

The Bones Hitch 4-Bike rack is born out of the design and function of Saris' best-selling Bones rack and brought to life in the form of a hitch rack. You wanted a nicely designed, tilting rack at a great value, and you wanted it to be lightweight. The result is the Bones Hitch. The Bones Hitch is one of the lightest racks in the marketplace yet every bit as strong and durable. That's why Saris backs it—along with all of their racks—with a lifetime warranty. Stylish, lightweight, easy to use and made here in the USA—who says you can't have it all? - Carries 4 bikes, up to 35 pounds each. - Preassembled in box. - Rack tilts down with pull of handle for easy access to rear of vehicle. - Coated hold-downs and anti-sway straps provide soft-touch protection to secure and stabilize the bikes. - Fits 1-¼-inch or 2-inch hitches out of the box. - Lifetime warranty. - Made in Madison, WI. - Injection-molded arms are strongest in the market. - Arms fold up and down with ease for quick storage and easy loading. - Welded steel mainframe. - Hitch lock sold separately (Model 3022). - Lightweight, steel construction weighs only 20 lbs.

Ultimate bike protection and loading/unloading ease with the MHS Duo Add-On Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo Add-On platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 35 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheel bases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

Ultimate bike protection and loading/unloading ease with the MHS Duo Bike Tray. Integrates seamlessly with any MHS Modular Base. - Saris MHS Duo platform bike rack connects quickly and easily to any MHS Base - DUO Dual-arm design provides the ultimate bike carrying versatility, compatible with the widest wide range of bikes, including e-bikes, fat bikes, fender bikes and step through - Zero frame contact bike protection and super stable bike transport - Dual-arm design provides superior bike protection and limits potential of bike to bike contact - Carries 1 bike up to 60 lbs - Tool-free, adjustable wheel block accommodates wheel sizes from 20 to 29 inches and tires as wide as 5 inches. - Accommodates wheelbases up to 53" - Fully locking with integrated steel cable that stores conveniently in tray - Fast, easy, and secure mounting to MHS Hitch Base (Base sold separately)

Shimano S-Phyre shoes offer the ultimate in comfort, adjustability, and power transmission. Specs: - Stiffness Index: 12 - Microfiber Synthetic Leather: Supple, light yet stretch-resistant material - External Heel Cup: External curved heel cup suppresses foot twist and roll - Carbon Sole/Mid Sole: Carbon fiber composite sole/mid sole - Hollow-Channel: Lightweight, ultra-rigid hollow outsole - Wider Cleat Adjustment: Expands range for mounting cleats Features - Integrated sole and upper construction sets a level of fit, stability, rigidity and lightweight performance - SHIMANO DYNALAST helps to reduce braking loss - Wide range fit adjustability accommodates various shapes of feet - Dual independent Boa IP1 dials allow quick and precise micro-adjustment - Adjustable powerzone wire guide holds foot securely - Built in drainage holes for rainy conditions

Pioneer's power meters are simply some of the best power-monitoring systems on the planet, and the SGX-CA500 computer is your chance to get the most out of your power meter and have a world-class data display. Pioneer has created the first, and only, power meter that measures power output and pedaling stroke efficiency for each individual leg, and the SGX-CA500 lets you analyze this data in real time. A few quick swipes give you access to your state-of-the-art ride data, and intuitive controls allow for scrolling, zooming, and screen customization to let you see what you want, when you want it. The 1.87-inch LCD screen makes it incredibly easy to see critical data, even if you are on the rivet up the final climb. As an added bonus, users of Shimano’s Di2 electronic road bicycle shifting system can now utilize the SGX-CA500 to track gearing and system status as they ride. - Delivers high functionality for practical situations, in a small, lightweight (75 g) package - Visualizes pedaling state and efficiency through graphical displays of force vectors (when used together with a pedaling monitor sensor) - Enables new modes of training focused on pedaling skill development - Displays over 100 data types, such as power, cadence, speed, and incline, all in real time - Easy, intuitive touch-panel operation, even when wearing full-finger gloves - Upload data to Cyclo-Sphere, our online data analysis service, via USB or Wi-Fi connection (Wi-Fi Internet connection required) - Weight: About 75 g - Dimensions: 58 mm (W) x 58 mm (H) x 19 mm (D) (without projection parts) - Connector: microUSB - Water-resistance: This device has a water-resistance rating of IPX-6/IPX-7 - Communications system (sensors): ANT+ - Communications method (network): Wi-Fi - Positioning system (latitude/longitude): GPS - Positioning system (altitude): Atmospheric pressure sensor - Display: 160x128 pixel, horizontal 1.87-inch outdoor type, Black and white touch panel (resistive touch display) - Built-in flash memory: 4 GB (user available capacity 3 GB) - Guaranteed operational temperature range: -10 to 50°C - Charging temperature: 0 to 45°C - Power supply voltage: DC 5V - Battery type: Lithium-ion battery - Battery operating time: Approximately 12 hours (the battery operating time may decrease depending on the operating conditions) - Charging time: Approximately 4 hours (Power off or normal charging) - Accessories: Bracket, USB cable, Strap, Quick Start Guide, Warranty card, Important Information for the User - Specifications and design are subject to change without notice.

Our premium gravel shoe blends the lightweight and stiffness of a road shoe with the durability of a mountain bike shoe. The Gravel X is ready for your fast gravel adventures with a full carbon sole to maximize power transfer. The glove-like fit of the 3D knit upper, combined with the micro-adjustable BOA Fit System, gives the Gravel X unrivaled comfort on day-long rides. This knit construction and perforated tongue are breathable, lightweight, and quick-drying. We know that gravel grinding can be dirty work, so we wrapped the toe and edges of the Gravel X in a scuff-resistant TPU layer and incorporated a mud-shedding open-tread sole design. - 3D knit upper for a glove-like fit - Micro-adjustable BOA Fit System with IP1 dial makes on-the-bike adjustments a breeze - Full carbon sole maximizes power transfer - Scuff-resistant TPU layer around toe and sides enhance durability - Wide-spaced tread provides grip and sheds mud - 2-bolt SPD cleat compatible - Fit: Runs small; order half size up

The Expedition PRO blends the lightweight and stiffness of a road shoe with the durability of a mountain bike shoe. If you’re lining up for a gravel event or cross-country race, look no further. The perforated synthetic leather upper features bonded construction to reduce bulk for a breathable slipper-like fit. A pair of BOA® L6C dials give riders independent adjustment of the mid and forefoot zones and we incorporated Soft TX lace guides to eliminate pressure points across the top of the foot. Off-road riding can be dirty work, so we wrapped the toe and heel of the 1:1® EX PRO Carbon sole in a scuff-resistant TPU layer and incorporated a mud-shedding open tread design. Inside, you’ll find a dual-density footbed that’s ergonomically designed to provide optimal support, pedaling efficiency, and comfort. Crush the big miles in comfort with the Expedition PRO. FEATURES: - BOA® Fit System with L6E Reel and forefoot strap for zonal fit adjustments - Soft TX lace guides eliminate pressure and hotspots - 2-bolt SPD cleat compatible - 1:1® Next Step Nylon composite sole does what no other can: delivers uncompromising pedaling performance and confident off-the-bike hike-ability - Reinforced toe bumper for added durability and protection - TPU lugs deliver off-the-bike confidence FABRIC: - Upper: 100% rubber/plastic, Bottom: 60% carbon fiber, 38% TPU, 2% steel

The latest iteration of our popular PRO Road shoe offers a slipper-like fit and a high level of stiffness, in a sophisticated package. Perforated synthetic leather is bonded together to form a sleek, strong, and breathable upper, while a pair of BOA® L6C dials give riders the ability to make independent micro-adjustments to the mid and forefoot for a perfect fit. Soft TX lace guides replace the traditional BOA cables to eliminate pressure points on the top of the foot. For maximal power transfer, this shoe is built off the 1:1® PRO Carbon Power Plate. It has been carefully designed to concentrate material where it matters most for stiffness, with ventilation zones where it’s not needed. An ergonomically-designed, dual-density footbed provides optimal support, pedaling efficiency and comfort, so you can go far and go fast. FEATURES: - Perforated synthetic leather upper is durable and breathable - BOA® Fit System with dual L6C dials for zonal adjustment - Soft TX lace guides eliminate pressure and hotspots - 1:1® PRO Carbon Power Plate drops weight and adds ventilation, without sacrificing stiffness - Dual density 1:1® footbed is ergonomically designed to provide optimal support, pedaling efficiency, and comfort - 252 grams per shoe (size 42) FABRIC: - Upper: 95% rubber/plastic, 5% textile, Bottom: 98% carbon fiber, 2% steel

The latest iteration of our popular Women’s PRO Road shoe offers a slipper-like fit and a high level of stiffness, in a sophisticated package. Perforated synthetic leather is bonded together to form a sleek, strong, and breathable upper, while a pair of BOA® L6C dials give riders the ability to make independent micro-adjustments to the mid and forefoot for a perfect fit. Soft TX lace guides replace the traditional BOA cables to eliminate pressure points and hotspots on the top of the foot. For maximal power transfer, this shoe is built off the 1:1® PRO Carbon Power Plate. It has been carefully designed to concentrate material where it matters most for stiffness, with ventilation zones where it’s not needed. An ergonomically-designed, dual-density footbed provides optimal support, pedaling efficiency, and comfort, so you can go far and go fast. FEATURES: - Women’s-specific fit - Perforated synthetic leather upper is durable and breathable - BOA® Fit System with dual L6C dials for zonal adjustment - Soft TX lace guides eliminate pressure and hotspots - 1:1® PRO Carbon Power Plate drops weight and adds ventilation, without sacrificing stiffness - Dual-density 1:1 footbed is ergonomically designed to provide optimal support, pedaling efficiency, and comfort - 252 grams per shoe (size 42) FABRIC: - Upper: 95% rubber/plastic, 5% textile, Bottom: 98% carbon fiber, 2% steel

The Ventral Air SPIN performance helmet is designed to deliver coolness in ways like never before. With precise ventilation ports and internal channels to control air intake and release at both low and high speeds, the helmet provides a supreme cooling effect over the whole head. Ideal for long rides in the mountains or hotter days in the saddle. Winner of the coveted Design and Innovation Award 2019, the Ventral Air SPIN works to enhance a rider's aerodynamic profile and minimize drag. Specific airflow zones enhance ventilation and cooling, while the aerodynamically optimized trailing edge reduces turbulence. The exceptionally lightweight Ventral Air SPIN has been developed according to our whole helmet approach. It features a fully wrapped unibody shell construction and an EPS liner, delivering an ideal balance between weight and safety. Practical features include a lightweight size-adjustment system that guarantees a personalized fit and an eye garage for easy and secure storage of eyewear when not in use. - Structurally optimized helmet with precise ventilation ports and internal channels to control the air intake and release at both high and low speeds. - Extreme cooling and ventilation due to ports and innovative internal airflow design. - Unique design optimized with CFD testing for aerodynamic performance and minimal air turbulence. - Features POC’s patent-pending silicone pad system, SPIN (Shearing Pad INside). - High-performance EPS liner with targeted and optimized density to provide the ideal balance of low weight and crash protection. - Fully wrapped unibody shell construction to increase safety and helmet integrity. - Lightweight size-adjustment system for a personalized fit. - Easily adjustable precision straps anchored to the helmet liner for extra comfort and safety. - Eye garage to keep your sunglasses securely in position when placed on the helmet.

- Pakyak auxiliary battery holder to mount Pakyak auxiliary battery inside the storage box.

You’re told to think big, so we did! Designed to hold up to 100lb/46kg of cargo, the Rear Basket lets you haul heavy items without affecting your stable ride. The durable alloy frame provides a classy look and steady ride. FEATURES: - Mounting hardware included - Strong aluminum frame for durability - Removable aluminum plate included - Compatible with Eurocrate 600x400mm capacity SPECIFICATIONS - Material: Aluminum - Weight: 11lbs/4.8kg - Outer Dimension: 675mm x 475mm x 155mm - Loading capacity: 100lb/46kg - Compatible with PakYak & Cito Models

FOR EXTRA COMFORT Upgrade to a cooler, more comfortable scooter-style ride with the Cito E+ Bench Seat. The height-adjustable feature lets you find the best seating position, while the additional padding makes for a seriously luxe ride. FEATURES: - Elongated seat designed with comfort in mind. - 3-height adjustment accommodates various rider heights, up to 190cm. - Compatible with 2023+ Cito E+. SPECIFICATIONS - Dimensions: 17.3"x7.1"x3.2"/44x 18x 8cm - Max load: 242.5lbs/110kg - Material: Aluminum - Weight: 5.3lbs/2.4kg